All technical data presented represent typical results, unless stated otherwise as min/max values.
No guarantee is made that material will meet exactly the values shown.

Heat Sealer for Fourth Side of Pouch with Vacuum Electrolyte Filling

The design and its dimensions are subject to change for further improvements.

Objective: To heat seal a laminated puch cell by impulse-sealer after filling electrolyte under vacuum. Three sides of the cell must be closed prior to this operation.
Sealing Method:


Min. Pressure: -90KPa, by Vacuum pump, monitored.
Electrolyte: Dispensed by tubing dispenser: T710 (no volume limit)
The electrolyte volume is controlled by # of rotations of thedispenser.
Cell size: 100mm x 100mm ~ 297mm x 210mm
Seal Width: 5 ~ 10mm
Temperature: ~ 300°C
Air (Ar.) supply: 0.5MPa, Terminal with PT1/4
Size: 680mmW x 400mmD x 800mmH
Weight: 80kg [HSTS-06], 19kg [vacuum pump]
Power: AC100V, 50/60 Hz, 15A


Vacuum > e-filling nozzle down > e-filling > e-filling nozzle up > heat-sealing > releasingto atmospheric pressure

*Time and the sequence are controlled digitally on the touch panel.

Application: Advanced energy
Product type: Machinery
Production scale: Lab, Pilot

TEL: 201-507-3300   •  UMC Pred 160 Chubb Avenue, Suite 206  Lyndhurst, NJ 07071 USA •    Email: John Braun; Tom Kocovic


Copyright 1996-2022. All rights reserved.