All technical data presented represent typical results, unless stated otherwise as min/max values.
No guarantee is made that material will meet exactly the values shown.

6-Can Electrolyte Filler, VD102N-6A

6-Road Electrolyte Filling Machine
Model: VD 102N-6A

This machine is to fill electrolyte into 6 cylindrical cells.

  1. Electrolyte is dispensed to sub tanks precisely by the HF plunger pump.
  2. Cell sensor detects a cell in every cell holder to cancel e-filling for empty cell holders.




AC200V, 50/60Hz, 500W






0.5MPa (N2, Ar) required



50L/min required


Filling Volume:



Max. Vacuum:



Max. Pressure:



Cell Holder:

18650 (26650, 26700, etc)

Flow Chart:
Cell Set
Cell Elevation
Plunger Pump Dispense
Vacuum: Max. -100kPa)
Vacuum Hold: Max. 99sec
Electrolyte Filling Start
Electrolyte Filing Stop
Vacuum Hold: Max. 99sec
Pressure Release
Pressurize: Max. 196kPa
Pressurize Hold: Max. 99sec
Pressure Release
Cell Release
Cell Pick-up


Application: Advanced energy
Product type: Machinery
Production scale: Lab

TEL: 201-507-3300   •  UMC Pred 160 Chubb Avenue, Suite 206  Lyndhurst, NJ 07071 USA •    Email: John Braun; Tom Kocovic


Copyright 1996-2022. All rights reserved.