|
|  |
Pellet Press
These parts are used for making pellet-typed electrodes for Lithium-ion batteries.
- Place the cylinder on the pedestal
- Put a mold and electrode-material in the cylinder.
- Put another mold and the press rod.
- Place the set in a press-machine, and press it.
- After pressing it, turn the pedestal over and press again as No.4 for taking out the electrode.
Please specify the following information:
- The diameter of the electrode
- The specifications of press-machines used (maximum power, heat or non-heat, available space, etc)
- Minimum particle size of the sample used
The size and the weight vary depending on the specifications above.
|
