150 x 300mm
Material: STKM,_Hcr plated and polished
3)
Precision
Mirror-finish, run-out accuracy
Within 5 microns
4)
Liquid injection
Dam type.
The liquid is put into the dam from the top.
Dam width: 30 - 250mm.
Dam capacity: 180cc. Max.
3.
Roller clearance adjustment
Rotational adjustment with a manual handle.
Analogue dial gage (indication 1/1000)
4.
Drying Unit (total length 1,100mm)
1)
Type:
Heat circulation type.
2)
Capacity:
40°C ~ 200°C
The inside temperature is set by a dial and digital-indicated.
3)
Structure:
Electrical hot-wind generation system
2.0kW(AC200V, three phase), eight blow outlets.
Double-layer structure with insulator.
5.
Drive
1)
Power source:
AC200V
2)
Driving system:
For the winding unit:
geared motor
Reel out side:
Powder brake (manual volume setting)
3)
Line speed:
50cm/min (adjustable)
6.
Reel-out/up system
1)
Paper tube:
ID76.2mm (3 inches)
2)
Maximum load:
30 kg
7.
Utilities
1)
Primary side 200V power source (power consumption 2.5kW, 3 phase)
2)
Safety features:
Two emergency-stop switches
(the control box and the winding system)
8.
Machine dimensions:
865W x 2000L x 1190H in mm
9.
Weight:
450Kg
1: Handle for adjusting knife roll
2: Analogue Dial Gage (1/1000)
3: Knife Roll (75 SUS304)
4: Back Roll (150 STKM)
5: Slurry Dam
6: Wind-out Roll
7: Volume Switch for Powder Brake at
Wind-out Roll
8: Adjuster
9: Winding Roll
10: Heating Unit
11: Hot air nozzle
12: Exhaust Pipe w/ Dumper
13: Control Box
14: Powder Brake at wind-out Roll
15: Dryer
16: Winding Motor
17: Back Roll
18: Emergency-stop Button
19: Thermal Sensor
75 x 300mm