To Hohsen list

Manual Crimping Tool Instructions

Assembling Procedure:

1. Set the gasket in the case.

2. Place a cathode in it.

3. Place a separator.

4. Add a suitable amount of electrolyte.

5. Place an anode.

6. Place the spacer disk. (Optional)

7. Place the wave spring. (Optional)

8. Close the cell with the cap.
    This procedure may differ depending on researches.

Crimping Procedure:

1. Hold up the lever.

2. Place the assembled cell on the bottom mold.

3. Pull down the lever until there is a firm resistance, and hold it down for a while.

To Hohsen list