This roll press is to press and adjust density/thickness of electrode sheets with two metal rolls.
| Model: | HSRP-2025 |
| Top Roll: |
Dia 200mm x 250mm W |
| Bottom Roll: |
Dia 200mm x 250mm W |
| Roll Material: |
SKD11, Hard-Chrome Plating |
| Roll Tolerance: |
<0.003mm |
| Press Width: |
<200mm |
| Press Method: |
Mechanical with screw |
| Maximum Load: |
2,000kg |
| Roll Gap: |
0~1mm |
| Gap Control: |
Two handles at both ends. Monitor: by 0.001mm with Digital Screw Encoder (Digi-collar) and monitor |
| Press Speed: |
0.1~1.0m/min by geared motor: forward or reverse |
| Electrode Supply: |
Manually, sheet by sheet |
| Safety Features: |
Safety door at electrode entrance: with a limit switch.
When open, power is shut down.
Safety cover at electrode exit: closed with screws.
Rotation mode switch with a key.
In operation the rotation mode is locked at FOR.
Rolls can be accessed from back for cleaning.
Two emergency buttons.
|
| Power: |
AC 200V, 15A, 3 phase, 5m long cable
No plug attached. |
| Size: |
Press: |
500mm W x 860mm D x 750mm H |
| |
Circuit Box: |
400mm W x 200mm D x 500mm H |
| Weight: |
280kg |
| Optional Functions at additional cost: |
| |
Table frame with wheels and locks
Size: 705mm W x 1138mm D x 710mm H
Weight: 120kg
Digital dial guage for gap monitor
Digital load guage
Digital speed monitor |
* The specifications are subject to change.
