|
|  |
Chamber Heat Sealer HSTS-06
The design and its dimensions are subject to change for further improvements.
| Specifications |
| Objective: |
To heat seal a laminated puch cell by impulse-sealer after filling electrolyte
under vacuum. Three sides of the cell must be closed prior to this operation. |
| Sealing Method: |
Impulse seal
|
| Min. Pressure: |
-9OKPa, by Vacuum pump, monitored. |
| Electrolyte: |
Dispensed by tubing dispenser: T710 (no volume limit)
The electrolyte volume is controlled by # of rotations of the
dispenser. |
| Cell size: |
Max. l50mm x l50mm x l0mm |
| Air (Ar.) supply: |
O.5MPa, Terminal with PT1/4 |
| Main body size: |
400mmW x 300mmD x 500mmH |
| Control box size: |
295mmW x 425mmD x l82mmH |
| Touchpanel size: |
250mmW x 70mmD x 180mmH |
| Power: |
AC100V, 50/60 Hz, 5A |
Flow-chart:
Vacuum > e-filling nozzle down > e-filling > e-filling nozzle up > heat-sealing > releasing
to atmospheric pressure
*Time and the sequence are controlled digitally on the touch panel.
|
