|
|  |
Heat Sealer
Objective:
This machine is to test many conditions for sealing aluminum-laminated film in terms of
temperature, pressure, and time.
| 1. Method: |
Air-cylinder: Diameter 50mm, Stroke: 50mm |
| 2. Sealing Bars: |
Upper Bar
1) Size: 5~25 width (to be defined by User) x 300 length in mm
2) Heater: 450W
3) Material: Aluminum w/ PTFE coated
Lower Bar
1) Size: 40 width x 320 length in mm
2) Heater: 450W
3) Material: Iron w/ r-3 plated
4) Silicon Rubber Sheet: 40 x 320 5 in mm
|
| 3. Timer: |
Digital, 0.1 ~ 99.9 sec. |
| 4. Temperature: |
50 ~ 300 Celsius Degree
Control: Digital PID thermal control on both bars |
| 5. Pressure: |
5Kgf/cm2, air-filter |
| 6. Start Trigger: |
Foot-switch |
| 7. Utility: |
AC100V 50/60Hz |
| 8. Dimensions: |
approx. 720 x 400 x 540 in mm |
| 9. Weight: |
approx. 55kg |
|
